To remove mineral deposits from toilets, you can follow these steps:
1. Gather your supplies:
- Rubber gloves
- Toilet brush
- White vinegar or lemon juice
- Baking soda
- Pumice stone (optional)
- Commercial toilet bowl cleaner (optional)
2. Put on rubber gloves: This will protect your hands during the cleaning process.
3. Flush the toilet: Start by flushing the toilet to wet the inside of the bowl.
4. Apply vinegar or lemon juice: Pour a generous amount of white vinegar or lemon juice into the toilet bowl, making sure to cover the areas with mineral deposits. Both vinegar and lemon juice contain acids that help dissolve mineral buildup.
5. Let it sit: Allow the vinegar or lemon juice to sit in the toilet bowl for at least 30 minutes. For more stubborn deposits, you can let it sit for a longer period, even up to a few hours or overnight.
6. Scrub the bowl: Use a toilet brush to scrub the inside of the bowl, focusing on the areas with mineral deposits. Apply extra pressure as needed to break down the deposits. Scrub under the rim and around the waterline as well.
7. Flush the toilet: Flush the toilet to rinse away the vinegar or lemon juice and the dissolved mineral deposits. Inspect the bowl to see if any deposits remain. If there are still visible deposits, you can proceed to the next step.
8. Apply baking soda paste: Create a paste by mixing baking soda with a small amount of water. Apply the paste to the remaining mineral deposits, ensuring they are fully covered. Let it sit for a few minutes.
9. Scrub the bowl with a toilet brush: Use the toilet brush to scrub the areas with the baking soda paste. Apply enough pressure to break down the remaining mineral deposits but avoid using excessive force that may damage the toilet bowl surface.
10. Rinse and repeat if necessary: Flush the toilet to rinse away the baking soda paste and inspect the bowl. If any mineral deposits persist, you can repeat the process or try alternative methods.
Additional options:
- Pumice stone: If the mineral deposits are particularly stubborn, you can use a pumice stone specifically designed for toilet bowl cleaning. Wet the pumice stone and gently rub it against the mineral deposits. Keep the stone and the surface of the bowl wet while using it to avoid scratching. Rinse the bowl thoroughly after using the pumice stone.
- Commercial toilet bowl cleaner: If the mineral deposits remain despite your efforts, you can try using a commercial toilet bowl cleaner formulated to remove mineral buildup. Follow the instructions provided on the cleaner's packaging for the best results. Apply the cleaner to the deposits, let it sit for the recommended time, scrub, and then flush.
Remember to read and follow the instructions and safety precautions provided by the manufacturer for any cleaning products you use. Avoid using harsh abrasives or cleaners that may damage the toilet bowl surface.